SanDisk CompactFlash Extreme III - Product Specifications; System Environmental Specifications; System Power Requirements

To Next Page

To Previous Page

CHAPTER 2 Product Specifications

For all the following specifications, values are defined at ambient temperature and nominal

supply voltage unless otherwise stated.

2.1 System Environmental Specifications

Table 2-1 contains environmental specifications which include temperature, humidity, acoustic

noise, vibration, shock and altitude.

Table 2-1 Environmental Specifications

CompactFlash CompactFlash Extreme III

Temperature

Operating:

Non-operating:

° C to 70° C

-25

° C to 85° C

-25

° C to 85° C

-25

° C to 85° C

Humidity

Operating:

Non-operating:

8% to 95% non-condensing

Acoustic Noise At 1 meter: 0 dB 0 dB

Vibration

Operating:

Non-operating:

15 G peak to peak maximum

Shock

Operating:

Non-operating:

2,000 G maximum

Altitude

(relative to sea

level)

Operating:

Non-operating:

80,000 ft. maximum

2.2 System Power Requirements

All values quoted in Table 2-2 are typical at 25° C and nominal supply voltage unless otherwise

stated.