SanDisk Sansa Clip - Connecting to your Computer; Connecting and Disconnecting

Basic Usage
8
Connecting to your Computer
To connect the Sansa
®
player to your computer, follow these instructions:
1. Connect the smaller end of the USB cable into an available USB port on the
computer.
2. Connect the larger end of the USB cable into the dock connector of the player.
3. The Sansa
®
player will show connected on its display screen.
4. The Sansa
®
player will appear in My Computer as Portable Media Player.
To remove the Sansa
®
player from your computer, simply disconnect the USB cable from
the player after you have finished charging, transferring, firmware upgrading, or
synchronizing files.
WARNING: Do not disconnect the player while it’s transferring data. Disconnecting the
player from the computer while the data is being transferred can damage
the device.