3
Basic Usage
7
This chapter provides you the basic usage instructions
for your Sansa
®
Clip player.
Basic Usage
Power Button
The power button is used to turn on or off the player, as well as resetting it.
Power On
Slide the Power Switch up to turn on the player. The Blue Ring will light up and the
Main Menu will appear after it has been booted up.
Power Off
Slide the Power Switch up and hold it for about 2 seconds to turn off the player.
NOTE: To prevent accidental power on, move the HOLD switch to the locked
position.
Reset
If the Sansa
®
Clip player freezes up, slide the Power Button up and hold it for
approximately 15 seconds. This is like a power down of the device. Once you
perform the reset, the adjustments you made during the last operation will be gone.
To Next Page
Loading...
