Need help?Do you have a question about the S&P MD and is the answer not in the manual?
General| Brand | S&P |
|---|---|
| Model | MD |
| Category | Dehumidifier |
| Language | English |
Details unit mounting, dimensions, weights, construction, and panel access.
Specifies compressor type, oil, refrigerant, and charge. Mentions low-pressure cut-out.
Describes fan type, airflow importance, filter function, and panel sealing.
Covers compressor on delay, hi/low pressure cut-outs, and high-level condensate warning.
Details operating temperature/humidity ranges and shows dehumidification rates.
Covers placement on level surfaces, avoiding water, drain hose requirements, and noise considerations.
Explains the process to switch between pump and gravity discharge modes for condensate removal.
Describes the two main operating modes: full dehumidifying and fan-only circulation.
Details how to change fan speed between full and slow, and recommends full speed.
Provides electrical specifications and references wiring diagrams for different models.
Illustrates the control panel layout and identifies key components like switches and indicators.
Details cleaning procedures for filter and drain pan, and safety precautions.
Lists common faults and their potential causes, categorized by symptoms.
Provides guidance on contacting local suppliers and telephone/fax support.
Lists electrical spare parts such as humidistat, contactor, switches, and fans.
Lists refrigeration and mechanical spare parts like air filter, compressor, and coils.
To Next Page