13
2. Turn the Menu/Time dial to adjust the hour
digits. The input time has to be within 0-23.
3. Press the Clock button and the minute digits
will ash.
4. Turn the Menu/Time dial to adjust the minute
digits, the input time has to be within 0-59.
5. Press the Clock button again to complete the
clock setting.
“:” will start ashing and the time will
illuminate to conrm that the clock setting is
complete.
Clock Setting
When the microwave is connected to the mains power, the LED display will show “12:00”, and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock button for 3 seconds and the
hour digits will ash.
Weight Adjust
Multi Stage
Cooking
Speed Defrost Auto Defrost
Start/
Quick Start
Stop/Cancel
Power Level Clock
M
e
n
u
/
T
i
m
e
2, 4
1, 3, 5
• This is a 12/24-hour clock. When the
microwave is connected to the mains
power for the rst time or when
the power is resumed after a power
interruption, the LED display will show
“12:00”. To re-set the clock, simply follow
the above 5 steps.
• In the process of clock setting, if the
Stop/Cancel button is pressed or if there
is no operation within 1 minute, the
microwave will go back to the previous
status automatically.
• If the clock needs to be reset, please
repeat steps 1 to 5.
• To nd out the current time while the
microwave is operating, press the Clock
button. It will last for 2-3 seconds and
then return to its original display.
Press the Clock button again, if you want to
set 12 hour clock.
S25MB12_IB_120514.indd 13 14/05/2012 5:48 PM
To Next Page
Loading...
Need help?
General
