Sandstrom SDW60GW13 User Manual

32
Hints and Tips
Technical Problems
Technical Problems
Problem Possible Causes Remedy
The dishwasher does not
start.
The door is not properly
closed.
Close the door rmly.
The unit is not connected to
the mains socket.
Connect the mains plug to the
mains socket.
The unit is not switched on. Press the
On/O button and
select a programme.
Error code “E1” displayed. Long inlet time. •Faucet is not open.
•Water intake is restricted.
•Water pressure is too low.
Error code “E4” displayed. •Overow.
•Leakage in the dishwasher.
•Disconnect from the mains socket.
•Call a qualied service agent.
Error code “E8” displayed. Failure of orientation of
distributary valve.
•Open circuit or break of
distributary valve.
•Call a qualied service agent.
Error code “E9” displayed. Button has been held down
for more than 30 seconds.
•Wipe the control panel.
•If problem persists, call a qualied
service agent.
The drain pump is not
working properly.
The anti-ooding system
has operated.
•Disconnect from the mains
socket.
•Disconnect the water inlet.
•Call a qualied service agent.
General Problems
Problem Possible Causes Remedy
Detergent residue is left
in the dispenser at the
end of the programme.
The detergent dispenser
was still damp when
detergent was added.
Make sure the dispenser is dry
before adding detergent.
The detergent dispenser
lid cannot be closed
properly.
Clogged detergent residue
is blocking the catch.
Clean the catch.
• Repairs should only be carried out by a qualied technician in strict accordance with current local and
national safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage to
the unit.
• Before calling for service, please refer to the section Hints and Tips to solve some general problems by
yourself.
SDW60GW_B13_IB_Final131227.indd 32 27/12/2013 12:30 PM

Sandstrom SDW60GW13 Specifications

General

Brand	Sandstrom
Model	SDW60GW13
Category	Dishwasher
Language	English