Why my Sandstrom SDW60W10N does not start?
Your Sandstrom Dishwasher might not be starting because the door isn't properly closed. Ensure you close the door firmly. Another reason could be that the unit isn't connected to the mains; connect the plug to the mains. Finally, check if the unit is switched on by pressing the “on/off “ button and selecting a program.
What to do if dishes are not dry in Sandstrom SDW60W10N Dishwasher?
If your dishes, cutlery, and glasses aren't drying in your Sandstrom Dishwasher, it could be due to insufficient rinse aid or an almost empty rinse aid reservoir. Try replenishing the reservoir, adjusting the rinse aid dispenser dial to a higher setting, or changing the brand of rinse aid. Also, ensure you're not removing the crockery too soon; leave it in the dishwasher until you hear the audible sound.
How to fix E1 error on Sandstrom SDW60W10N?
The E1 error on your Sandstrom Dishwasher can be caused by several factors related to water supply. First, ensure the water tap is turned on fully. If it is, check that the water pressure isn't too low (less than 0.04MPa). If the issue persists, the flow meter might be broken, requiring you to disconnect the dishwasher from the mains, disconnect the water inlet, and call a qualified technician. Also check the wire terminals which connect the flow meter.
Why is smearing appearing on glassware and cutlery in my Sandstrom Dishwasher?
If you notice smearing on glassware and cutlery after using your Sandstrom Dishwasher, the rinse aid dosage might be set too high. Try adjusting the dial of the rinse aid dispenser to a lower setting.
Why is detergent residue left in the dispenser of my Sandstrom Dishwasher?
If detergent residue remains in the dispenser of your Sandstrom Dishwasher after a cycle, it's likely because the detergent dispenser was damp when you added the detergent. Ensure the dispenser is dry before adding detergent.
How to fix Sandstrom Dishwasher detergent dispenser lid that won't close?
If the detergent dispenser lid on your Sandstrom Dishwasher won't close properly, it may be due to clogged detergent residue blocking the catch. Try cleaning the catch to resolve this issue.
How to stop knocking noise in Sandstrom SDW60W10N Dishwasher?
A knocking noise in the wash cabinet of your Sandstrom Dishwasher usually indicates that a spray arm is hitting an item in the basket. Interrupt the program and rearrange the items obstructing the spray arm.
Guide for the process of installing the dishwasher unit.
Details on connecting the dishwasher to the water mains.
Guide for connecting the drain hose to the waste pipe.
Explanation of buttons, lights, and display window meanings.
Compares different wash cycles, processes, and consumption.
Lists items that should not be washed in the dishwasher.
Step-by-step guide to filling the detergent dispenser.
Instructions on how to fill the rinse aid reservoir.
Step-by-step instructions to initiate a wash program.
Steps to clean the dishwasher's filters to prevent blockages.
Explains error codes and their remedies.
Addresses common technical issues and solutions.
Solutions for common issues like residue, noise, and drying problems.
Important safety warnings for using the appliance.
Guidelines for proper electrical earthing of the appliance.
General| Type | Freestanding |
|---|---|
| Capacity | 12 place settings |
| Energy Rating | A |
| Wash Programs | 6 |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Child lock | No |
| Weight | 42 kg |
| Delay start | Yes |
To Next Page
