26
GB
Spray Arms
Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be
checked and cleaned regularly.
• Use a pointed object, eg. a cocktail stick, to loosen food
particles in the spray arms’ jets.
Do not attempt to remove the spray arms.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature is below 0˚C. If your appliance is left in
an unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it runs for 1 minute only. This allows to drain out all
the excessive water that remains in the unit.
3. Disconnect from the mains.
4. Empty the dishwasher.
5. Close the dishwasher’s door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch the water.
Should you encounter any difficulties with the above steps, please ask a service technician for assistance.
Moving the Dishwasher
If you have to move the unit, for instance due to moving house, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the unit from the water inlet and drain.
3. Remove the unit from the current location with the hoses discharged.
4. Pull the unit out together with the hoses.
Avoid over tilting the unit during transportation.
Maintenance After Prolonged Period of Non-Operation
If you are not going to use the unit for any prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the unit from the water inlet and drain. Use a suitable receptacle to catch the water.
3. Open the door slightly to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
SDW60W_X10N_IB_5L_111021_ELabel.indb 26 11年10月21日 下午6:55
To Next Page
Loading...
Need help?
General
