Sandstrom SKBWLTP17 User Manual

12
Hints and Tips
Keyboard not working:
• Ensure the keyboard is switched on.
• Move the keyboard closer to the device.
• Restart the computer.
• Check battery installation. Replace battery if needed.
In Wireless mode:
• Make sure the Nano Dongle is plugged into a USB
port and the computer is on or try the Nano Dongle
in a dierent USB port.
• If the Nano Receiver is plugged into a USB hub, try
plugging it directly into the computer.
• If keyboard performance is slow or intermittent
around a wireless network, unplug the Nano Dongle
from the USB port and then reinsert it. To reactivate
the keyboard, switch it on, o and on again using
the ON/OFF switch on the bottom of the keyboard.
• If automatic pairing fails, pair the dongle with the
keyboard manually.
a) Remove the dongle from your device USB port.
b) Switch on the keyboard.
c) Press the FN + Backspace buttons to enter the
pairing mode and the LED indicator will ash.
d) Plug the dongle into the USB port within 10 sec.
e) After successfully connecting in 2.4GHz Wireless
mode, the LED indicator light will extinguish.

Sandstrom SKBWLTP17 Specifications

General

Brand	Sandstrom
Model	SKBWLTP17
Category	Keyboard
Language	English