14
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Problem Solution
No power. • Ensure the mains cable is connected securely at both ends.
• Make sure that the ON mode is selected.
The unit does not
play iPod/iPhone
les or does
not function as
expected.
• Make sure the iPod/iPhone is connected properly.
• Standby mode may be activated; press
again.
• Make sure the iPod/iPhone is switched on.
• Vibrations may have caused the iPod/iPhone to come loose from
the docking station.
• Check that no audio cable is plugged in the AUX IN socket.
The remote
control does not
function.
• Use the remote control near the unit.
• Point the remote control at the remote control sensor on the
unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and the unit.
The unit does not
respond when
pressing any
buttons.
The unit may freeze up during use. Switch the unit o and then on
again at the mains socket to reset the unit.
I cannot nd
“SSDKBT13” on
my Bluetooth
®
device.
• Ensure the unit is in pairing mode.
• Ensure the Bluetooth® function is activated on your Bluetooth®
device.
• Re-pair the unit with your Bluetooth® device.
If any functional abnormality is encountered, unplug the unit from the mains socket
and reconnect it again.
SSDKBT13_IB_130506_Zell.indd 14 6/5/13 1:45 PM
To Next Page
Loading...
