WARNING! READ THE FOLLOWING BEFORE STARTING INSTALLATION
• It is the installers’ responsibility to verify that the wall will safely support the total load of the TV and the TV bracket. Never exceed the
designated maximum TV load.
• Assembly is required. Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury
and property damage.
• The supplied TV bracket is only for use on vertical walls constructed from solid brick, solid concrete, solid wood and solid wooden columns.
• Parts are heavy; take care when handling. For some steps, 2 people are required for installation.
• Check the TV bracket frequently to ensure that it is safe and secure. Additional tools (not included) are required for the installation. Do not
over-tighten screws.
• Keep this instruction manual for future reference.
Thank you for purchasing your new product.
Please follow this quick start guide for a successful rst time set up.
Read all the safety instructions carefully before use and keep the quick start guide
for future reference.
Flat to wall Tilting
TV Mount for Large TVs
Instruction Manual
STL14
IB-STL14-211026V8
This Mount comes with a 3-year guarantee. If the product fails whilst in use for its
intended purpose, please return it, along with your receipt, for a full refund or
replacement. Please follow the instruction manual carefully when installing this device.
Http://sandstromstyle.com
Watch this video for
quick assembling.
Currys Group Limited (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
Currys Ireland Limited (259460)
3rd Floor Oce Suite
Omni Park SC, Santry, Dublin 9, Republic of Ireland
Visit Partmaster.co.uk today for the easiest way
to buy electrical spares and accessories. With
over 1 million spares and accessories available
we can deliver direct to your door the very
next day. Visit www.partmaster.co.uk or call
0344 800 3456 (UK customers only) Calls
charged at National Rate.
Quick Start Guide
UNPACKING
SAFETY
MAX TV LOAD
50 kg
KG
TV SIZE
42” - 75”
DISTANCE TO WALL
24 mm
TILT ANGLE
0° ~ 15°
VESA COMPLIANCE
100 x 100 - 600 x 400 mm
x 4
A1
x 4
A2
x 4
A3
x 4
A5
x 1
A6
x 2
A7
x 1
A4
Soft pad
M6 × 15 M6 × 35M5 × 30M5 × 15
× 4
B1
× 4
B2
× 4
B3
× 4
B4
M8 × 20
× 4
B5
M8 × 35
× 4
B6
M8 × 50
× 4
B7
× 4
B8
× 8
B9
M6-M8 × 5 M6-M8 × 10
× 4
B10
M4, M5/M6, M8
To Next Page
Need help?
General
