Choice RSTAT5 RF
Wireless Digital Programmable Thermostat
Installation Instructions
This unit must be installed by a suitably qualied person in accordance
with the latest IEE Wiring Regulations.
Isolate mains supply before commencing installation. Please read all installation
instructions before proceeding.
Ensure that the xed wiring connections to the mains supply is via a fuse rated
at not more than 16 amps and a class ‘A’ switch having a contact separation of a
minimum of 3mm in all poles.
No earth connection is required as the product is double insulated but ensure
continuity of earth throughout the system
SAFETY NOTICE
!
To Next Page
