Need help?Do you have a question about the Sangean ATS-303 and is the answer not in the manual?
Power| battery capacity | 4 x 1.5 Volt |
|---|---|
| external power supply | 6 Volt |
| mains supply unit | 6 Volt |
Radio Frequencies| FM wave range | 87.5-108 MHz |
|---|---|
| MW wave range | 522-1620 kHz 9 kHz tuning steps |
| SW1 wave range | 2.3-7.3 MHz |
| SW2 wave range | 9.5-26.1 MHz |
Weight and Dimensions| dimensions | 16.5 x 11.0 x 3.5 cm |
|---|---|
| weight | 0.430 kg |
Details the functions of numbered controls 1-19, including display, tuning, and settings.
Explains the meaning of various icons (A-K) shown on the radio's display.
Guides on battery types, installation, and the procedure for changing batteries.
Step-by-step guide to set the current time using the display and tuning keys.
Explains how to choose between FM, MW, SW1, and SW2 bands using the range switch.
Details how to use the SW FREQ:METER/FULL switch for searching SW channels.
Describes the function of the ferrite and telescopic antennas for optimal reception.
Explains manual tuning using keys and interpreting the signal lamp.
Details adjusting the medium wave tuning grid with the 9K/10K switch.
Instructions for storing up to 20 stations using preset tuning keys.
Enables stereo reception via headphones for FM stations.
Explains how to control the audio volume using the volume dial.
Protects settings from accidental changes by locking the operation.
Guide to setting the desired alarm time using the radio's controls.
How to wake up to the radio by setting the STAND BY switch.
Instructions for waking up to the HWS beeper alarm.
Procedures for checking alarm time and switching off the radio or HWS alarm.
How to use the sleep function to automatically switch off the radio.
Lists technical details including wave ranges, batteries, dimensions, and weight.
To Next Page
