Sangean DDR-7 - Manual Tuning - FM

014
Manual tuning – FM
When in FM mode, rotate Tuning control knob to tune to a station.
Press the Volume Up / Down button to adjust the sound level as
needed.
1.
2.
Scan sensitivity setting – FM
Your radio includes a local / distant option for the auto-scan function. By
setting the radio to the “local” scan option, weaker signals from more
distant transmitters can be ignored by the radio, making stronger signals
easier to nd.
When in FM mode, press and hold the Menu button to access FM menu.
Rotate the Tuning control knob to select “FM Scan Zone”. Press the
Select button to enter the scan sensitivity adjustment mode. The
current setting will be marked with an asterisk.
Rotate the Tuning control knob to select “Local” (Strong stations only)
or “Distant” (All stations). The “Distant” option will allow the radio to
nd weaker signals when scanning.
Press the Select button to conrm your selection. The setting is stored
in the radio and remains in force until changed or until a System
Reset.
1.
2.
3.
4.