Sangean DT-250 - User Manual

DT-250
Operating instruction
Mode d’emploi
Instruccions de manejo
Gebruiksaanwijzing
Bedienungsanleitung
GB
F
E
NL
D
3A81QG110000A
AM/FM stereo 2 bands
PLL Synthesized Personal Radio
Radio portable synthétisée
AM/FM stéréo 2 bandes PLL
AM/FM stereo 2 bands
PLL Synthesized Personal Radio
Draagbare AM/FM stereo
2 bands PLL Synthesizer Radio
Tragbares MW/UKW-Stereoradio
mit PLL-Synthese

Sangean DT-250 Specifications

Power

current consumption AM	60 mA
current consumption FM	70 mA
batteries	3 Volts ( AA, UM-3 size x 2 )

Audio

band frequency AM	522 – 1710 kHz
band frequency FM	87.50 – 108 MHz
output power	60 mW (10% THD ) via built-in speaker

Weight and Dimensions

weight	108 g
dimensions	64x106.5x30 mm

Summary

Basic Controls

Headphone;Antenna Jack

Enhances FM reception when headphones or external antenna are plugged in.

Volume Control

Power Switch

Turns the radio on and off; includes a 90-minute auto shut-off for battery saving.

Battery Installation

Inserting Batteries

Proper insertion of two AA (UM-3) batteries into their respective compartments.

Low Battery Indicator

Battery Replacement Procedure

Tuning Operations

Antenna Usage for Reception

Seek Tuning

Automatically scans and stops at the next active signal station by pressing tuning buttons.

Manual Tuning

Manually selects desired frequency by repeatedly pressing tuning buttons.

Memory Tuning

Recalls radio stations previously programmed into memory presets.

Setting Memory Presets

Procedure to store desired stations into the radio's available memory presets.

Setting the Clock

Clock Adjustment Procedure

Steps to set the hour and minute for the clock display while the radio is off.