Need help?Do you have a question about the Sangean DT-140 and is the answer not in the manual?
General| Tuning | Digital |
|---|---|
| Supported Radio Bands | AM, FM |
| FM Frequency Range | 87.5 - 108 MHz |
| AM Frequency Range | 520 - 1710 kHz |
| Display | LCD |
| Headphone Output | Yes |
| Battery Type | AA |
| Batteries Required | 2 |
| Power Source | Battery |
| Speaker | Built-in |
Identifies and explains all physical controls and ports on the device.
Explains the meaning of various icons and information shown on the LCD screen.
Important safety guidelines for using the device and its battery.
Instructions for recharging the device's internal battery via USB or adapter.
Procedure to set the current time on the radio display using the jog wheel.
Guidance on using the earphone cord as an antenna for FM reception.
Adjusting volume level and enabling the 90-minute auto shut-off feature.
Explains scan tuning and manual tuning to find radio stations.
Instructions for storing radio stations into memory presets.
How to tune to a previously stored radio station.
How to switch between Stereo and Mono reception for FM stations.
Activating the DBB function for stronger bass sound.
Procedure to set AM and FM tuning steps for station selection.
Using the lock switch to prevent accidental button presses.
Procedure to reset the radio to its initial factory default state.
Details on power requirements, battery life, frequency coverage, and output.
To Next Page
