To Next PageTo Next Page
Need help?Do you have a question about the Sangean dpr-39 and is the answer not in the manual?
Read, keep, heed, and follow instructions. Avoid water and clean with a dry cloth.
Ensure proper ventilation and avoid proximity to heat sources.
Use correct plugs and protect cords. Only use manufacturer-specified accessories.
Use stable supports, unplug during storms, and rely on qualified service personnel.
Do not expose to rain, moisture, or splashing to prevent hazards.
Covers headphone socket, power button, and volume control for basic operation.
Details the LCD display, preset buttons, jog wheel for tuning/menu, and lock switch functionality.
Explains the USB socket for upgrades, battery compartment, and strap holder.
Guide to accessing the battery compartment and inserting AA batteries correctly.
Instructions on checking battery power via the LCD display and low battery indicator.
Details the 3.5mm stereo headphone socket for audio output.
Clock automatically updates via DAB or FM RDS signals upon tuning to a station.
Ensure headphones or earpiece is plugged in before starting initial setup.
Press the power button on the top of the radio to begin operation.
Radio scans for stations; use jog wheel to select desired station from list.
Adjust the volume control for comfortable listening after selecting a station.
Press jog wheel while listening to cycle through PTY, Multiplex Name, Time, Date, etc.
Access menu by holding jog wheel; options include Find Services, Back, FM mode, Settings, Prune.
Details full scan, back, and manual tune options within the Find Services menu.
Options for returning to previous menus, switching to FM mode, and accessing settings.
Configure auto select, return to menu, and details on software upgrade procedure.
Check SW version, perform factory reset, and adjust LCD display contrast.
Configure backlight auto-off and Dynamic Range Control (DRC) settings.
Set display language and configure the auto shut-off sleep timer.
Remove unavailable stations from the DAB station list.
Turn on the radio, enter the menu, and select FM mode to tune into FM stations.
Initiate scanning by turning the jog wheel until 'scanning' is displayed for signal search.
Choose between 'Local' (strongest signals) or 'Distant' (all stations) for FM scanning.
Press and hold the jog wheel for 2 seconds to enter the FM menu.
Select 'Local' or 'Distant' to define the scope of FM station scanning.
Return to listening, switch to DAB mode, or access FM settings from the menu.
Configure audio settings (Stereo/Mono) and details on software upgrades.
Check the current software version installed on the radio.
Perform factory reset, adjust contrast, and set backlight behavior.
Configure the radio's display language.
Tune to a station and press/hold preset button (1-5) to store it.
Select operating mode and momentarily press the desired preset button to tune.
Set the key lock switch to LOCK to disable buttons and jog wheel.
Switch the key lock button to the opposite position to disable the lock.
Details battery type (LR6 AA Alkaline) and approximate battery life.
Lists the FM (87.50-108 MHz) and DAB+ (Band III 5A-13 F) frequency ranges.
Specifies headphone impedance (32 ohm) and style (in-ear).
Power| battery type | 2 x LR6 (AA size) Alkaline |
|---|---|
| battery life | Approx 12 hours |
Frequency Coverage| FM frequency range | 87.50-108 MHz |
|---|---|
| DAB+ Band | III 5A-13 F |
Circuit Features| headphones impedance | 32 ohm |
|---|
