Sangean dpr-39 - Clock Setting; Automatic Clock Update; Initial DAB Operation; Preparation for Initial Setup

8
Important:
Excessive volume levels from earphones
GB
and headphones may cause damage to your
hearing.
Setting the clock
The clock will automatically update each time
you turn on the radio and tune to a DAB radio
station or to an FM station which is
broadcasting the time via RDS. Time display
will flash 0:00 for a few seconds then display
the clock time when it receives DAB or FM –
RDS clock time signal.
Initial operation –DAB
This step is only necessary for initial setup –
1. Make sure a headphones/an earpiece is
plugged in.
2. Press the Power button on the top of your
radio.