Need help?Do you have a question about the Sangean DPR-45 and is the answer not in the manual?
Power| mains AC voltage | 230-240 V |
|---|
Frequency Range| FM frequency range | 87.5 – 108 MHz |
|---|---|
| AM frequency range (9K European version) | 522-1629 KHz |
| AM frequency range (Australian version) | 522-1710 KHz |
| AM frequency range (10K) | 520-1710 KHz |
Battery| battery type | Size “D” / UM-1 / R20 |
|---|---|
| battery voltage | 1.5V |
| number of batteries | 4 |
Audio| loudspeaker size | 5” |
|---|---|
| loudspeaker impedance | 4 Ω |
| output power | 1 Watt |
Ports & Interfaces| headphone socket diameter | 3.5 mm |
|---|---|
| FM aerial system | telescopic aerial |
| DAB aerial system | telescopic aerial |
Information on how secondary radio services are displayed and managed during tuning.
Explains how the clock automatically updates when tuning to radio broadcasts or synchronizes with DAB.
Provides step-by-step instructions for manually setting the date and time on the digital receiver.
Instructions on how to adjust the display brightness for standby mode.
Describes the location and function of the 3.5mm headphone socket.
Procedure to reset the radio to factory default settings, clearing stations and alarms.
How to view the current software version of the digital receiver.
Details the mains power input voltage required for the digital receiver.
Specifies the FM and AM frequency bands supported by the digital receiver.
Indicates the DAB Band III channel range supported by the receiver.
Lists the type and quantity of batteries required for the digital receiver.
Outlines key circuit features including loudspeaker, output power, aerial, and headphone socket.
To Next Page
