Sangean DPR-45 - Selecting a DAB Radio Station; Secondary DAB Services

10
GB
Selecting a DAB radio station
1. Press the Standby button to switch on your digital receiver. The display will show “DAB” for a
few seconds.
2. Press the Band button to select DAB radio mode. The display normally shows the name of the
current station selected.
3. Rotate the Tuning control to access the radio station list and to scroll through the list of available
stations. Stop rotating the Tuning control when you nd the station that you wish to hear.
4. Press and release the Tuning control to cause the digital receiver to tune to the chosen station.
The display may show “TUNING” while your digital receiver nds the new station.
5. Adjust the Volume control to set the sound level as needed.
Secondary services
1. Certain radio stations have one or more secondary services associated with them. If a station
has a secondary service associated with it then the secondary service will then appear immediately
after the primary service as you rotate the Tuning control.
2. Most secondary services do not broadcast continually and if the selected service is not available,
the radio will re-tune to the associated primary service.