Sangean DT-140 - Reset and Specifications; Factory Reset; Product Specifications

06
GB
F
E
NL
D
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by the following
procedure. By performing a factory reset, all user entered settings will be erased.
1.
Turn off the radio.
2.
Press and hold Preset 3 button and the Band button at the same time, the “dEF” will appear
andashonthedisplay.Continueholdingdownthesetwobuttonsuntilalltheiconsappear
on the screen. Now the factory reset is completed.
Specication
Power Requirement
Battery Lithium-ion rechargeable battery 3.7V 930mAh
Battery Life
Approx24hoursoflisteningwithearphonesfor4hoursaday
at normal volume level.
Frequency Coverage
FM 87.5-108MHz
AM
522-1710kHz(9kHz)
520-1710kHz(10kHz)
Output Power 1.0mW + 1.0mW
Earphone Jack 3.5mmdiameter(stereo)
※
The barcode label on the product is dened as below:
Serial number
Production month
Production year
Product code
TheCompanyreservestherighttoamendthespecicationswithoutnotice.
If at any time in the future you should need to dispose of this product please note that: Waste
electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical
and Electronic Equipment Directive).