19
GB
6. Use the app to complete radio the setup, including giving the radio a name if needed.
7. Select the preferred method to connect your radio to the network. If you wish to connect using
an Ethernet cable, please refer to the later section ‘Using an Ethernet connection’.
8. For a WiFi connection the app will ask you to choose a WiFi network and enter the appropriate
password. Your radio will connect to your network.
�
Note:
If when setting up your radio your Android device complains that it cannot connect to the
internet this is because it is temporarily connected directly to your radio. You should ignore this
warning message.
Cancel Done
To Next Page
Loading...
