EasyManua.ls Logo

Sangean DPR-32 - Charging the Radio

Sangean DPR-32
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Charging the radio
The DPR 32 features a built in 1180mAHLithium rechargeable battery to power the
radio.
Before operating the radio for the rst time please fully charge the battery.
The DPR 32 is supplied with a 5V/500 mA AC adaptor.
The battery run time is approx. 18 hours with headphones. Reduced power, distortion,
‘stuttering’ sounds or battery power indicator in low” are all signs that the battery
needs to be recharged.
Note:
If charging the radio when the power is off, the battery power icon does not
display on the LCD.
1. Insert the adaptor plug into the DC socket on the top of your radio. Plug the
adaptor into a standard mains outlet and the radio will begin charging the built in
battery. Charging time is approx. 4 hours with radio off and 10 hours with radio
on. The battery power icon on the LCD display will ash whilst charging and stop
ashing when the radio is fully charged.

Related product manuals