7
DAB mode
Initial operation – DAB(Digital Radio)
This step is only necessary for initial setup –
1.
2.
3.
4.
5.
Ensure the battery is fully charged.
Press the Power button on top of your radio.
The display will show “Welcome to Digital Radio” and start to scan the entire DAB
channel range and stop at the rst found station. If the radio has been used before,
the last used station will be selected. Press in the tuning/menu jog wheel to play
the station.
Turn the jog wheel either up or down to display station list and nd desired station.
Press in the jog wheel to select the station. The radio will tune to the station and
display the station name.
Adjust the volume control for comfortable listening.
To Next Page
Loading...
