6
Battery operation using alkaline batteries
1. Remove the battery cover on the back of the unit .
2. Slide the switch inside the battery compartment to the Alkaline
position.
3. Insert 6 LR14 (C size) alkaline batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with
the correct polarity as shown on the back of the radio. Then replace
the battery cover.
Important:
● when using alkaline batteries the battery switch must be placed
in the alkaline position. Failure to do so could result in serious
damage to the batteries or radio.
● When the batteries are exhausted, you can tell from the battery
life indicator on the top right corner of the display. The radio will
then switch itself off. It may not be possible to switch the radio
back on until the batteries are replaced, or until the radio is
connected to the mains adaptor.
To Next Page
Loading...
