EasyManua.ls Logo

Sangean PR-D17 - Maintenance and Specifications; Factory Reset Procedure; Technical Specifications

Sangean PR-D17
9 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
08
GB
E
Factory reset
If your radio fails to operate correctly, or some digits on the display are missing / incomplete or you simply just want to
restore the radio to its original factory setting, carry out the following procedure.
By performing a factory reset, all user entered settings will be erased.
Press and hold the Power button and Preset 5 button at the same time, the “DEFAULT” will appear and ash on the
display. Continue holding down these two buttons until all the icons appear on the screen. Now the factory reset is
completed.
Specications
Power Requirements
AC Power adaptor DC 9V 0.7A center pin positive
Batteries 6 X UM-2 (C size)
Battery Life
Approx. 70 hours of listening for 4 hours a day at normal volume using alkaline
batteries
Frequency Coverage
FM 87.5 -108 MHz
AM 522-1710 kHz (9 kHz / step)
AM 520-1710 kHz (10 kHz / step)
Circuit Feature
Loudspeaker 2.5 inches 8 ohm
Output Power 800+800 mW
Headphone socket 3.5mm diameter
Antenna System
FM telescopic antenna
AM built-in ferrite antenna
Operating temperature range 0°C to +35°C
The barcode label on the product is dened as below:
Serial number
Production month
Production year
Product code
Sangean reserves the right to amend the specications without notice.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products
should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive).

Related product manuals