9
GB
Manual tuning – AM / FM
1. Press the Power button to switch on your radio.
2. Press the Band button to select the required band. Fully extend
the antenna for best reception.
3. Press and release the Tuning up/down button to tune to a station.
The FM frequency will change in steps of 50/100kHz and AM
frequency will change in steps of 9/10kHz.
4. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
5. Set the Volume using the Volume Up/Down buttons to the desired
settings.
To Next Page
Loading...
