7
AUX IN
1. Turn on the radio, and press the STEP/BAND button until “AUX”
is displayed.
2. Connect a stereo or mono audio source (ie iPod, MP3 or
CD player) to the Aux in socket on the side of the radio.
And the AUX-IN light will be on.
3. Adjust the Volume control on your iPod, MP3 or CD player.
Setting the radio alarm
1. To activate the alarm, press and hold the ALARM button for
more than 2 seconds and it will beep and the display will
show “ALARM”.
2. To deactivate the alarm, press and hold the ALARM button for
more than 2 seconds and it will beep and the “ALARM” will
disappear from the display.
When the radio alarm is selected, the radio will turn on and play
the last played radio station at the chosen alarm time. (If it is under
AUX band, or the battery is low, then the alarm will sound by
buzzer). The radio alarm will continue for one hour unless turned
off by pressing the Power button.
To Next Page
Loading...
