Need help?Do you have a question about the Sanhua SEC Series and is the answer not in the manual?
Covers electrical shock, installation environment, power, wiring, and interference avoidance.
Instructions for mounting the controller on a DIN rail in an electric cabinet.
Guidance on installing pressure and temperature sensors at evaporator outlets.
Configuration of EEV steps, speed, and mode using DIP SW2 and SW3.
Determining the control method (e.g., Superheat, Manual) using DIP SW1 and SW4.
Explains controller display, LEDs, and button functions for navigation and operation.
Step-by-step guide to enter, modify, and save controller parameters.
Key parameters for configuration, including refrigerant, superheat, and timings.
Details transmission line, method, baud-rate, and protocol type for communication.
Lists communication status bits and their associated functions for SEC601 and MMI.
General| Communication Protocol | Modbus RTU |
|---|---|
| Protection Class | IP20 |
| Housing Material | Plastic |
| Series | SEC Series |
| Power Supply | 24V AC/DC |
| Application | Refrigeration and Air Conditioning Systems |
To Next Page
