Sani king PERFORM-MAX 940 - User Manual

1
Customer Service 800-222-0169
kingtechnology.com
Perform-Max
Pool Sanitizer
Instruction Manual
CHLORINE/BROMINE FEEDER
for Pools up to 50,000 Gallons
Model 940
for pools up to
50,000 gallons
To minimize the risk of serious injury, death or
damage, before installing or first using this
equipment, read Instruction Manual and all safety
labels and follow all safety instructions and
precautions. Save manual for future reference.
WARNING
Ver la versión en español de este manual en kingtechnology.com/brands/sani-king
Model 920
for pools up to
25,000 gallons

Summary

Perform-Max Product Overview

Model 920 Features

Details specifications for the Model 920 in-line pool sanitizer.

Model 940 Features

Details specifications for the Model 940 in-line pool sanitizer.

Model 980 Features

Details specifications for the Model 980 in-line pool sanitizer.

Model 960 Features

Details specifications for the Model 960 off-line pool sanitizer.

General Safety Information and Warnings

General Notes and Contact Information

Provides general operating advice, safety principles, and customer service contact details.

Explanation of Signal Words

Defines hazard signal words like DANGER, WARNING, and NOTICE used in the manual.

Explanation of Safety Pictographs

Illustrates and explains the meaning of various safety pictographs used to denote hazards.

Safety Label and Hazard Precautions

Fire, Explosion, and High Pressure Hazards

Outlines specific dangers related to fire, explosion, and pressure, with precautions.

General Warnings and Notices

Lists critical warnings for operation, chemical handling, and equipment safety.

Installation Tips for Proper Performance

High Flow Rate Installation Guidance

Provides installation tips for pools with high water flow rates exceeding 80 GPM.

In-Floor Cleaner Installation Options

Details preferred installation methods for pools equipped with in-floor cleaning systems.

Pool and Spa Combination Installation

Offers guidance for installing the feeder in pools with combined spa features.

Filter Flex-Hose Installation (Model 920)

Tools and Materials for Flex-Hose Install

Lists all necessary tools and materials required for the filter flex-hose installation.

Filter Flex-Hose Installation Steps

Step-by-step instructions for performing the filter flex-hose installation.

Achieving Optimal Back Pressure

Recommendations for adjusting eyeball fittings to achieve desired back pressure.

Base Flex-Hose Installation (Model 920)

Tools and Materials for Base Flex-Hose

Lists all necessary tools and materials required for the base flex-hose installation.

Base Flex-Hose Installation Procedure

Detailed steps for installing the feeder using base flex-hose connections.

Stability and Back Pressure Advice

Provides tips on mounting stability and achieving optimal back pressure.

Hard-Plumbed Installation (Model 920)

Tools and Materials for Hard-Plumbed Install

Lists all necessary tools and materials for hard-plumbed installation.

Hard-Plumbed Installation Procedure

Step-by-step guide for completing the hard-plumbed installation.

Pipe Material and Securing the Unit

Advises against copper pipe and offers tips for securing the feeder unit.

In-line Installation (Model 940;980)

Tools and Materials for In-line Install

Lists all necessary tools and materials for in-line installation.

In-line Installation Procedure

Step-by-step instructions for performing the in-line installation.

Model 980 Specific Bushing Instructions

Specific guidance for Model 980 using a 2" x 1 1/2" threaded bushing.

Off-line Installation (Model 960) - Part 1

Tools and Materials for Off-line Install

Lists all necessary tools and materials for the off-line installation.

Off-line Installation Steps 1-5

Details the initial steps of the off-line installation process.

Off-line Installation (Model 960) - Part 2

Off-line Installation Steps 6-15

Covers the remaining steps for the off-line installation, including tubing and scoops.

Final Off-line Installation Checks

Includes advice on check valves and mounting stability for off-line setup.

Step 1: Preparing the Pool

Ensure Adequate Pool Circulation

Advises on circulation time, filter cleaning, and flow rates.

Check and Balance Water Chemistry

Guides on checking for metals, water hardness, and initial balancing.

Understanding Water Balance Guidelines

Provides target ranges for key water parameters like pH, alkalinity, and chlorine.

Step 1: Preparing the Pool - Water Balance

Adjusting Total Alkalinity Levels

Explains how to test and adjust total alkalinity to the recommended range.

Adjusting pH Levels

Details how to test and adjust pH levels for optimal pool conditions.

Adjusting Hardness and Stabilizer

Guides on testing and adjusting water hardness and stabilizer levels.

Step 2: Putting the Feeder to Work

Initial Feeder Setup and Chemical Loading

Covers turning off the pump, setting the dial, and filling the unit with chemicals.

Procedure for Changing Chemicals

Instructions on how to switch between using chlorine and bromine in the feeder.

Step 3: Setting the Control Dial

Initial Control Dial Settings

Provides recommended starting dial settings for chlorine and bromine use.

Adjusting Dial for Water Testing

Explains how to adjust the dial based on daily water test results.

Air Bleeding for Low-Speed Pumps

Addresses bleeding air from the unit when using low-speed pump operation.

Step 4: Routine Pool Care

Maintain Filtration and Circulation Hours

Advises on running the filtration system for proper water turnover.

Regular Water Testing and Balance

Emphasizes the importance of regular testing for pH, alkalinity, and sanitizer levels.

Shocking the Pool

Provides guidance on when and how to shock the pool water.

Winterizing the Pool Feeder

Emptying Chemical Contents

Steps to operate the feeder until empty and set the dial to minimum.

Draining and Preparing for Storage

Instructions for draining all water from the unit and loosely replacing caps.

Troubleshooting Common Issues

Addressing Cloudy or Discolored Water

Solutions for common water clarity problems like cloudiness or discoloration.

Resolving Algae Formation Problems

Guidance on treating and preventing algae growth in the pool.

Troubleshooting Under-Chlorination

Steps to diagnose and fix issues with low chlorine levels in the pool.

Troubleshooting Over-Chlorination

Solutions for diagnosing and correcting problems with excessively high chlorine levels.

Parts List - Model 920

Parts Included with Model 920

Lists all components that come included with the Model 920 unit.

Replacement Parts for Model 920

Catalog of available replacement parts for the Model 920 feeder.

Parts List - Models 940, 960, 980 & Off-line Kit

Parts Included with Models 940, 960, 980

Lists components included with Models 940, 960, and 980.

Replacement Parts for Models 940, 960, 980

Catalog of available replacement parts for Models 940, 960, and 980.

Parts for Off-line Kit (Model 960)

Lists components specific to the Model 960 off-line installation kit.

Maintenance: Control Dial O-Ring Replacement

Model 920 O-Ring Replacement Procedure

Step-by-step guide for replacing the control dial O-rings on Model 920.

Models 940;960;980 O-Ring Replacement

Detailed instructions for replacing control dial O-rings on Models 940, 960, and 980.

Maintenance: Cap O-Ring and Knob Replacement

Model 920 Cap O-Ring Replacement

Instructions for replacing the cap O-ring on the Model 920 feeder.

Models 940;960;980 Cap O-Ring Replacement

Steps for replacing the cap O-ring on Models 940, 960, and 980.

Feeder Knob Replacement Procedure

Simple steps for replacing the feeder knobs on various models.

Limited One-Year Warranty

Obtaining Warranty Service and Exclusions

Details the process for warranty service and lists common exclusions.

Warranty Limitations and Chemical Usage

Explains limitations on implied warranties and the impact of proper chemical use.

Sani king PERFORM-MAX 940 Specifications

General

Brand	Sani king
Model	PERFORM-MAX 940
Category	Accessories
Language	English