Sanitaire ULTIMATE 6060 Series User Manual (English)

Questions and Answers:

K
kimberly73Aug 11, 2025
Why is my Sanitaire ULTIMATE 6060 Floor Machine losing suction power?
- W
  William CookAug 11, 2025
  If your Sanitaire Floor Machine loses suction power, there are a few potential reasons: * The tanks might not be seated correctly. Try picking up both tanks and reseating them to ensure they fit snugly on the unit. * The Dirty Water Tank might be full. Empty the tank if it has reached the maximum fill line. * The Formula and Clean Water Tank may be empty. Check the fluid levels and refill if necessary.
D
dmontesAug 19, 2025
How to fix reduced spray or no spray on a Sanitaire ULTIMATE 6060 Floor Machine?
- W
  Wanda ReevesAug 19, 2025
  If your Sanitaire Floor Machine has reduced spray or no spray, here's what you can do: 1. Refill the Formula and Clean Water Tank if it's empty. 2. If the tank isn't seated completely, turn the power OFF, then remove and reseat the tank. 3. If the pump has lost prime, hold the end of the hose below the water level in the tank to prime it.
J
Jennifer AnthonyAug 26, 2025
What to do if my Sanitaire Floor Machine has reduced spray or no spray?
- M
  Megan RoseAug 26, 2025
  What to do if your Sanitaire Floor Machine has reduced spray or no spray? First, check if the Formula and Clean Water Tank is empty and refill it. Next, ensure the Formula and Clean Water Tank is completely seated; if not, turn the power OFF and reseat the tank. Finally, the pump may have lost prime; to resolve this, hold the end of the hose below the water level in the tank to prime it.
D
Diane McgrathSep 3, 2025
Can an empty tank cause loss of suction power in Sanitaire Floor Machine?
- D
  Dustin FernandezSep 3, 2025
  If the Sanitaire Floor Machine's Formula and Clean Water Tank is empty, this could cause loss of suction power. Check the fluid levels in the tank.