59
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Guidance and manufacturer’s declaration - electromagnetic emissions
The SIH21/2 is intended for use in the electromagnetic environment specified below. The customer or the
user of the SIH21/2 should assure that it is used in such an environment
Emissions Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The SIH21/2 uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
RF emissions
CISPR 11
Class B The SIH21/2 is suitable for use in all establish
-
ments other than domestic, and may be used
in domestic establishments and those direct-
ly connected to the public low-voltage power
supply network that supplies buildings used
for domestic purposes, provided the following
warning is heeded:
Warning: This equipment/system is intended
for use by healthcare professionals only. This
equipment/ system may cause radio interfe-
rence or may disrupt the operation of nearby
equipment. It may be necessary to take mitigati-
on measures, such as re-orienting or relocating
the SIH21/2 or shielding the location.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker emissions
IEC 61000-3-3
Complies
To Next Page
