Need help?Do you have a question about the Sanken Samco SVC06 and is the answer not in the manual?
Key safety instructions and warnings for safe product use.
Precautions and prohibitions for safe operation and handling of the inverter.
Guidelines for proper installation to prevent hazards like fire, damage, or injury.
Precautions for safely handling and moving the inverter to avoid injury or damage.
Critical safety warnings and guidelines for correct and safe electrical wiring of the inverter.
Essential safety precautions and warnings to follow during the operation of the inverter.
Safety guidelines for carrying out maintenance and inspection by qualified personnel.
Instructions for proper disposal of the product through specialized waste services.
General warnings and prohibitions regarding product modification, usage, and safety device installation.
Steps to verify the product is undamaged after delivery and before initial use.
Explanation of the model naming convention and its components.
Important environmental and operational precautions for using the inverter safely and effectively.
Identification of the main external parts of the inverter and their functions.
Guidelines for selecting a suitable installation location and storage conditions to ensure safety and performance.
Recommendations for inverter installation orientation, surrounding space, and ventilation for proper heat dissipation.
Step-by-step instructions for removing and reinstalling the front cover of the inverter for access.
Procedures for detaching and reattaching the operation panel, including external installation.
Overview of peripheral devices and their connection purposes for the inverter system.
General wiring guidelines, including power supply connection, motor wiring, and grounding requirements.
Detailed diagram illustrating the main and control circuit terminal connections for the inverter.
Description and connection diagrams for the main circuit terminals of the inverter.
Details on the arrangement and wire size for control circuit terminals.
Explanation of the functions and specifications of various control circuit terminals.
Details on assigning functions to multifunctional input and output terminals using function codes.
Explanation of switching between SINK and SOURCE logic for input terminals using SW1.
Comprehensive connection diagram for the control circuit terminals, including optional cards.
Guidelines for installing and wiring optional boards into the inverter.
Information on the built-in EMC filter and how to enable or disable it.
Identification and description of the components and keys on the inverter's operation panel.
How to switch between different display modes (Status Display, Function Code Display) on the operation panel.
Details on the status display mode, including version, inverter status, and alarm displays.
How to navigate and use the function code display mode for setting inverter parameters.
Explanation of special functions like copying function data, displaying changed codes, and initialization.
Instructions for connecting the operation panel to the inverter using an extension cable.
Flowchart outlining the sequence of steps for operating the inverter.
Detailed procedure for performing a test run of the inverter, including basic settings and motor control.
Explanation of special operational functions like JOG operation and Hold operation.
Glossary of technical terms used in the operation section of the manual.
Overview of how function codes are classified and used to change inverter actions.
A list of function codes related to basic operation settings like motor control and frequency.
A list of function codes for configuring analog and digital input/output terminals.
A list of function codes for system-related settings like copying functions and data initialization.
Function codes for special features such as energy saving, V/f separation, and scheduled operations.
Function codes related to PID control and communication settings for the inverter.
Function codes for configuring motor parameters and settings for vector control.
Function codes for extended functions like position control and torque control settings.
Information on operation errors, how they are displayed, and their effect on inverter operation.
Details on conflict and interference errors that occur when function code settings conflict.
Alerts for warning statuses that indicate protection functions are activated but the inverter continues running.
Information on alarm statuses that occur when protection functions stop the inverter.
Safety precautions to follow before performing any maintenance or inspection on the inverter.
Periodic inspection checklist for various components of the inverter, control circuit, and cooling system.
Instructions and procedures for replacing internal parts of the inverter, such as the fan.
Guidelines for performing megger tests on the motor and main circuit, avoiding the control circuit.
Procedures for electrical measurements of the main circuit, including voltage, current, and power factor.
Standard specifications for the 200V series of the inverter, including output and input power characteristics.
General technical specifications for the inverter, covering control modes, driving performance, and environment.
Specifications for the RS485 communication protocol, including speed, data format, and error checks.
Guidelines for proper storage environments to maintain the inverter's condition.
Overall dimensions of the inverter's main unit for various models.
Dimensional diagrams for the operation panel and its external installation opening.
Dimensional specifications for the DC reactor accessory for different inverter capacities.
List and details of optional peripheral equipment such as reactors, filters, and braking resistors.
Information on available optional cards like PG option and PROFIBUS board, including compatibility.
To Next Page
General
