Need help?Do you have a question about the Sanken S06-4A005-B and is the answer not in the manual?
Essential safety guidelines for handling the inverter, covering electrical shock and fire hazards.
Precautions for safe operation, including avoiding smoke, water, and physical contact with internal parts.
Critical environmental conditions and prohibitions for inverter installation to prevent faults or fire.
Guidelines for safe handling and movement of the equipment to prevent personal injury from falling.
Crucial safety instructions for electrical wiring, emphasizing qualified personnel and proper connections.
Safety warnings during operation, focusing on electric shock, burns, and preventing equipment faults.
Safety precautions for maintenance, emphasizing qualified personnel and power disconnection.
Safety guidelines for product disposal, highlighting risks of capacitor explosion and harmful gas.
General safety warnings for unlisted situations, potentially involving electric shock or injury.
Steps to check the product after unpacking for any damage or issues, and contact the retailer if found.
Illustration and explanation of the product's nameplate label for identification and specifications.
Decoding the model number structure to understand inverter specifications like voltage class and capacity.
Essential precautions for first-time use, including environmental checks and correct wiring to prevent damage.
Specifies environmental parameters for installation and storage, including temperature and humidity limits.
Details on inverter mounting orientation and required clearances for heat dissipation.
Visual guide for removing and installing the front cover for wiring access during installation.
Lists and explains essential peripheral devices for inverter connection, like transformers and circuit breakers.
General guidance and precautions for wiring, including power cutoff and wire length limitations.
Provides a detailed schematic showing all main and control circuit terminal connections.
Explains the different main circuit terminals, their functions, and connection diagrams.
Details the control circuit terminals, their functions, and associated specifications.
Instructions for installing and wiring optional boards to the inverter.
Identifies and describes the components of the inverter's operation panel, including keys and displays.
Explains the function of each key on the operation panel for user interaction.
Details the different display modes of the operation panel's monitor and their contents.
Outlines fundamental operations like setting function codes and confirming settings.
Describes advanced functions such as copying settings, changing codes, and initializing parameters.
Provides a flowchart detailing the sequence of operations from installation to test runs.
Step-by-step instructions for performing a test run after installation and basic settings.
Explains specific operational modes like JOG operation and Hold operation.
Explains how function codes are represented and provides a classification of function blocks.
A comprehensive list of all function codes, their data content, resolution, and factory presets.
Detailed explanations of various function code categories like Basic, Input/Output, and System functions.
Lists and describes common operation errors that can occur during inverter use.
Explains errors arising from conflicting function code settings or interference.
Details warning statuses that alert users to protection functions without stopping operation.
Describes alarm statuses where protection functions stop the inverter, indicating system faults.
Lists common inverter phenomena and their corresponding check points for troubleshooting.
Essential safety precautions to be taken before performing maintenance or inspection.
Lists specific items to check during periodic maintenance and inspection.
Guidance on replacing parts, advising to contact the supplier for assistance.
Instructions for performing a megger test, emphasizing precautions for the inverter's control circuit.
Procedures for measuring electrical parameters in the main circuit, including power factor calculation.
Provides standard specifications for various inverter models, including motor capacity and electrical ratings.
Details general specifications for the inverter, covering control modes, performance, and protection functions.
Outlines the specifications for serial communication protocols like SANKEN and Modbus-RTU.
Specifies the recommended environmental conditions for storing the equipment.
Provides dimensional drawings and specifications for the main body of different inverter models.
Shows the dimensional diagram and opening hole specifications for the operation panel.
To Next Page
General
