SANKI P212-F - User Manual

PIEZO FEEDER CONTROLLER
Instruction Manual
【High-Function Type】
Ｐ２１２－Ｆ
Ｐ３１２－Ｆ
This Instruction Manual is applicable to Piezo
Feeder Controller version 2 and later.
Confirm the version information displayed
upon powering ON.
Ver. 2
Read the Manual carefully beforehand to ensure the safe use of the Controller.
After reading, store the Manual within reach so as to be ready for rereading.
The dealer is requested to be sure to deliver the Manual to the end user.

SANKI P212-F Specifications

General

Input Voltage	24 VDC
Number of Digital Outputs	8
Output Type	Relay
Communication Port	RS-232
Type	PLC
Program Memory	8K steps
Operating Temperature	0°C to 55°C
Category	Controller
Humidity	5 to 95% RH, non-condensing