Sansui F50 - Troubleshooting Guide

Unoicial Sansui F50 User Manual
Troubleshooting Guide
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power
Main Power Switch is
not in ON position
Switch the power switch on the
right of unit to POWER ON
position
Battery drained
Recharge the battery, power on
later
No sound
Volume level in the
minimum position
Raise volume level by turning
the VOLUME control
Plugged in earphone
Unplug earphone
Audio/Video le was
damaged
Switch tracks or download the
music again
Poor radio
reception
The radio antenna is
not deployed
Extend the radio antenna and
adjust it to the optimal position
Radio frequency
deviation
Adjust the frequency to match
the radio frequency
Interference from
devices near this unit
Move the unit away from
interference sources,
preferably to a the window for
easy signal reception
Radio not positioned
correctly in MW radio
mode
Properly place the unit
horizontally and facing the
station
The video le
cannot be
played, and
there is a splash
screen or
automatic jump
during the
The le format is too
large or incompatible
Use a format conversion tool to
convert video les to 720P.
Please note that this unit
supports H.264 1080P (30Hz)