Santa Fe Advance2 - Specifications

4
Santa Fe Advance2 Installation & Operation Instructions www.Santa-Fe-Products.com | 1-800-533-7533
Specifications
Part Number: 4034180
Blower: 309 CFM @ 0.0" WG
Power: 640 watts @ 80°F and 60% RH
Supply Voltage: 115 volt – 1phase – 60 Hz
Current Draw: 5.7 amps
Operating Temp.: 49°F Min., 95°F Max.
Sized For: (Refer to website for more sizing considerations)
Crawl Space
Very Tightly Sealed Up to 3,400 Sq. Ft. (17,000 Cu. Ft.)
Moderately Sealed Up to 2,600 Sq. Ft. (13,000 Cu. Ft.)
Some Leaks & Imperfections Up to 2,200 Sq. Ft. (11,000 Cu. Ft.)
Basement
Very Tightly Sealed Up to 2,700 Sq. Ft. (27,000 Cu. Ft.)
Moderately Sealed Up to 2,400 Sq. Ft. (24,000 Cu. Ft.)
Some Leaks & Imperfections Up to 2,200 Sq. Ft. (22,000 Cu. Ft.)
Minimum Performance at:
80°F and 60%RH 70°F and 60%RH
Water Removal: 90 Pints/Day 71 Pints/Day
Efficiency: 6.1 Pints/kWh 4.9 Pints/kWh
Energy Factor: 2.88 L/kWh 2.3 L/kWh
Air Filter: MERV-8, Standard Pleat
Size: 14" x 17.5" x 2"
Power Cord: 9', 115 VAC, Ground
Drain Connection: 3/4" Threaded Female NPT
Drain Hose: 8' Direct Gravity Drain Hose (5/8" ID x 7/8" OD)
Refrigerant Type: R410A (Refer to manufacturers label for
more information)
Refrigerant Amount: 1 lb., 5 oz.
Dimensions: Unit Shipping
Width: 14.5" 23"
Height: 19.4" 30"
Length: 26" 40"
Weight: 80 lbs 95 lbs
Optional Accessories:
4031062 MERV-8 Filter (1.75” x 14” x 17.5”)
4033036 MERV-8 Filters 4-Pack
4033037 MERV-8 Filters 12-Pack
4035319 MERV-11 Filter (1.75” x 14” x 17.5”)
4035131 MERV-11 Filters 4-Pack
4035132 MERV-11 Filters 12-Pack
4033038 Pump Kit
4028616 Caster Kit
4036695 Hang Kit
4033039 Duct Kit, Supply Only
4035646 Duct Kit, Return Only
4026969 10” Flex Duct 25’
4022126 10” Flex Insulated Duct 25’
4020175 Remote Dehumidistat
26"
19.4"
14.5"
19.4"
19.4"
14.5"
FRONT
BACK
26"
19.4"
14.5"
19.4"
19.4"
14.5"
FRONT
BACK
26"
19.4"
14.5"
19.4"
19.4"
14.5"
FRONT BACK