What to do if the LCD of my Santint A4 shows “Emergency Stop Switch Unreleased”?
If the LCD of your Santint Dispenser shows 'Emergency Stop Switch Unreleased', first ensure that the emergency stop switch is fully released. If the problem persists, the emergency stop switch or its wiring might be broken, requiring you to change the switch or connect the wire.
General| Model | A4 Series |
|---|---|
| Category | Dispenser |
| Sequential Dispensing | Yes |
| Pump Material | Stainless Steel |
| Material | Steel |
Detailed guide for physically installing the main machine components and ensuring proper placement.
Instructions on how to connect and set up the computer required for operating the dispenser.
Guide on the process of installing the necessary software for the dispenser's functionality.
Steps for configuring the machine's parameters via the software interface.
Physical adjustments and checks to ensure the machine operates correctly.
Instructions for safely and correctly filling the machine's canisters with colorant.
Procedure for removing air from the pump to ensure accurate dispensing.
Process for calibrating the dispenser to ensure accurate colorant measurement.
Guide on how to position paint cans on the platform for dispensing operations.
Steps for cleaning the internal cleaning box of the dispensing machine.
Daily checks and actions required to maintain the dispenser's performance.
Periodic maintenance schedule and procedures for ensuring long-term reliability.
Steps to remove and replace the outer canister of the dispenser.
Steps to remove and replace the inner canister of the dispenser.
To Next Page
