SANTOS: User and maintenance manual
98126 EN 1.0 - 12 2020 6 / 10 www.santos.fr
5. Tighten the thumb-wheel (5) by turning in a clockwise direction (right-handed
thread) to reduce the quantity of ground coffee per measure (the thumb-wheel
is adjusted in half-turns).
6. Loosen the thumb-wheel (5) by turning in an anti-clockwise direction to
increase the quantity of ground coffee per measure.
7. Draw off more than 6 measures for the adjustment to be taken into account.
IMPORTANT: It is important to keep a sufficient quantity of ground coffee in the dose
measurer to ensure a good measure consistency. Too little ground coffee will reduce
the weight of the measure dispensed.
CLEANING
• Cleaning in a jet of water or a high pressure spray is prohibited.
Clean the dose measurer (2) regularly using a brush.
Make sure that the walls of the coffee dispensing conduit (4) and the 6 branches of the
cross bars are always clean.
MAINTENANCE
Spare parts:
This machine requires no particular maintenance.
If servicing is necessary to replace parts subject to wear, please refer to the list of
components (see the exploded view at the end of this manual).
IMPORTANT: The use of spare parts other than certified original SANTOS
parts is prohibited.
Whenever ordering spare parts (see references in the exploded view at the end of this
manual), please quote the following:
the type
the appliance serial No
given under the appliance.
To Next Page
Loading...