10
center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
1. Locate your stud. Verify and mark the
2. Position the template
18
at your desired
height and line up the holes with your stud center line. Level the template and tape in place.
≤ 5/8 in.
(16 mm)
STEP 2A Attach Wall Plate to Wall
Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm)
21
18
To Next Page
