Need help?Do you have a question about the Sanus VSF415B1 and is the answer not in the manual?
Describes the magnet, probing pin, and level features of the stud finder.
Outlines the two-step process for locating wall studs using the Sanus magnetic stud finder.
Verify TV weight compatibility and wall material before installation.
Ensure all necessary tools are available and proceed with installation.
Lists all components and hardware required for attaching the bracket to the TV.
Choose correct screws and spacers based on TV model and back design.
Position and secure the TV bracket onto the television using selected hardware.
Lists components and hardware for attaching the wall plate to the wall.
Detailed instructions for locating wall studs using the magnetic stud finder.
Procedures for using the template, drilling pilot holes, and securing the wall plate.
Steps for marking and drilling pilot holes into concrete or block walls.
Instructions for inserting anchors and securing the wall plate to concrete surfaces.
Lists all components and hardware required for hanging the TV mount.
Connects the TV bracket assembly to the wall plate arm using provided hardware.
Use hex key to modify the tension of the arm's extension.
Adjust the tension for left/right and rotation movements of the arm.
Lists components like cable plates and ties for organizing wires.
Provides methods for routing and securing cables along the mount.
To Next Page
General
