Need help?Do you have a question about the Sanus VLL5-B1 and is the answer not in the manual?
Verify TV weight does not exceed 125 lb and check mount compatibility if necessary.
Determine wall material (wood studs, concrete) for proper mounting. Steel studs require a special kit.
Specifies drywall thickness, minimum stud size, and fastener spacing for wood stud mounting.
Use stud finder to locate screws, find stud edges, and mark stud centers with a pencil.
Specifies minimum concrete thickness, block size, and fastener spacing for concrete walls.
Position template, mark holes, and drill pilot holes into concrete surfaces.
Hook the TV brackets onto the wall plate, allowing for positioning adjustments.
Press the bottom of the TV into the wall plate to lock the brackets securely.
Turn adjustment screws on TV brackets to raise or lower sides for optimal leveling.
Slide the TV left or right along the wall plate to adjust its horizontal position.
Disconnect cables and pull release cords to detach TV brackets from the wall plate.
To Next Page
General
