Specifications
Specifications
18
Power Source AC127-240 Volts, 50/60Hz
Colour System PAL/SECAM/NTSC4.43/NTSC/PAL-60Hz
Sound System B/G, I, D/KK’, M/M
Channel Coverage
VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13 // 0-11, 5A (AUS), 1-11 (NZ)
UHF: 21-69, A14-A69, J13-J62 // 28-69 (AUS)
CATV: S1
-
S41, X, Y, Z, Z+1, Z+2
Audio output (RMS) Model: CA14SE1(V), CP14SE1(V), CA21SE1(V), CP21SE1(V)
CA21VF1, CP21VF1, CA21VF1K, CP21VF1K, CA21CF1(V),
CP21CF1(V): 5W + 5W
Model: CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA21SE1M,
CP21SE1M, CA21CF1M , CP21CF1M, CA21SE1K, CP21SE1K
: 2.5W + 2.5W
Speakers : 5 cmx 9 cm x 2 pcs (All models)
Ext. terminals
DVD Video Component: Composite/Component Y, CB,CR input
(Optional models)
Video Inputs: Phone Jack x 2 (1.0Vp-p, impedance 75 Ω)
Audio Inputs: Phone Jack (L/R) x 2 (436mVrms, impedance more than 40KΩ)
Video monitor outputs: Phone Jack x 1 (1.0Vp-p, impedance 75 Ω)
Audio monitor outputs: Phone Jack (L/R) x 1 (436mVrms, impedance less than 600Ω)
Monaural model Ext. terminals
Video inputs: Phone Jack x 2 (1.0Vp-p, impedance 75 ohm)
Audio inputs: Phone Jack x 2 (436mVrms, impedance more than 40K ohm)
Video monitor outputs: Phone Jack x 1 (1.0Vp-p, impedance 75 ohm)
Audio monitor outputs: Phone Jack x 1 (436mVrms, impedance less than 600 ohm)
Dimension: Model
CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA14SE1(V),
CP14SE1(V): 433(W) x 336(H) x 359(D) mm
Model
CA21SE1(V), CP21SE1(V), CA21SE1M, CP21SE1M, CA21SE1K,
CP21SE1K : 580(W) x 460(H) x 457(D) mm
Model
CA21CF1M, CP21CF1M, CA21CF1(V), CP21CF1(V) : 580(W) x 460(H) x 465(D) mm
Model
CA21VF1, CP21VF1, CA21VF1K, CP21VF1K : 580(W) x 460(H) x 468(D) mm
Weight: Model
CA14SE1(V), CP14SE1(V), CA14SE1K, CP14SE1K, CA14SE1M,
CP14SE1M
: approx. 8.7 Kg
Model
CA21SE1(V), CP21SE1(V), CA21SE1M, CP21SE1M, CA21SE1K,
CP21SE1K
: approx. 19.1 Kg
Model
CA21CF1M, CP21CF1M, CA21CF1(V), CP21CF1(V)
: approx. 20.6 Kg
Model
CA21VF1, CP21VF1, CA21VF1K, CP21VF1K
: approx. 20.5 Kg
Specifications subject to change without notice.
To Next Page
Loading...
