Sanyo CES26WSD7-B User Manual

English -14-
Display the Main Menu by pressing the "M" button.
Highlight the Timers line by pressing or button
and press the “SELECT” button to display the Timer
menu.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, thechannel to be selected, the starttime, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
SELECT
i
MENU
TIMER MENU
No Channel Name Start End Date Mode
1. ITV 1 20:00 21:00 12/05/2005 Active
2. BBC ONE 00:00 00:00 01/01/2005 Inactive
3. BBC ONE 00:00 00:00 01/01/2005 Inactive
4. BBC ONE 00:00 00:00 01/01/2005 Inactive
5. BBC ONE 00:00 00:00 01/01/2005 Inactive
6. BBC ONE 00:00 00:00 01/01/2005 Inactive
Toggle Mode Exit Edit Timer More
• To set an event, highlight its mode button using the
or button and press the “SELECT” button to
display the timer entry window.
Name:
Start:
End:
Date:
Mode:
3. ITV 1
00:00
00:00
03/06/2005
Once
• Here the five settings of channel name, start time,
end time, date and frequency mode can be set. You
can move freely between each setting using the
or buttons.
• The channel name is set using the or button to
display the channel whichbroadcasts the programme.
•The start time,endtime and date areeachset with the
digit buttons on the remote control in 24-hour format.
• The frequency mode determines how often the
receiver operates this event and is set with the or
button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the
date is entered, “Entered time is not valid” message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer expires,
the TV switches to the channel which it is switched
from.
Selected digital channel will be output via Scart-2.You
shouldconnect yourVCRtoScart-2for recordingdigital
broadcast.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
•Pressthe"M"buttontodisplaythe MainMenuanduse
or button to highlight the Language line and press
the “SELECT”button.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
• Use the or button to highlight the soundtrack
languagerequired andpress the “SELECT”button.Nor-
mal viewing, with the required language soundtrack,
can be resumed by pressing the "M" button.
Languages
English
TV Setup
To be abletogothrough TVfunctions, you can usethis
item.
The digital TV Setup menu screen is accessed from
the main menu. Press the "M" button to display the
main menu and use or button to highlight “TV
Setup”, press the “SELECT” button to display TV
Setup menu screen.
ENG-32781W-1050UK-32 INCH 17MB22 UK IDTV-(2 HDMI-WO PIP-SPDIF)-50104961.p65 04.04.2007, 16:5914

Sanyo CES26WSD7-B Specifications

General

Brand	Sanyo
Model	CES26WSD7-B
Category	TV
Language	English