1
To enter into the special function setting mode, press and
hold the MENU button of the remote control, then press the
PROGRAMME DOWN button on the TV set.
Once TUNING LOCK is switched on, further channel tuning
(Pre-set) is not possible. The Channel Swapping function also
is not possible.
2
Select an item of the special functions by pressing the
PROGRAMME UP or DOWN button on the remote control
or the TV set.
3
Set the selected special function “ ON “ by pressing the
VOLUME + or
-
button. To cancel, set to “ OFF”.
(2) Tuning Lock setting
The following special functions can be set up on this TV
set.
With this function, a maximum sound volume limit can be set at
any level.
(3) Music Mode setting
When Music Mode is ON, Programme position from “91” to “99”
and “0” are set Music Mode. Only sound is provided and any
picture is not on the screen under Music Mode.
Set AV-START to ON and every time the TV set is switched on,
AV position will be the initial programme position.
(4) AV Start setting
TUNING LOCKED
How to set the special function:
Note: When making the VOLUME LOCK setting, set the
desired maximum sound volume by pressing the VOLUME + or
-
button before entering Special Function setting mode.
AV
MUSIC
Turns black
screen
4
Press the MENU button of the remote control to return to
the normal TV mode.
(1) Volume Lock setting
To Next Page
Loading...
