Hotel Mode Setting
The Hotel Mode is a feature that might be needed
by a hotel management to confine the TV that put
in the hotel room, so it will not disturb other rooms.
HOTEL MODE (ON/OFF):
It is used to activate or inactivate all of the hotel
mode setting. Also, channel preset is prohibited
when the hotel mode is set on.
MAX. VOLUME:
Setting the limit of maximum sound volume.
START PROGRAM:
Setting for the start up programme position.
Setting Procedure
1
1 Press and hold the Menu button on the
remote control and press the Programme Up
button on the TV set to display the Hotel Mode
menu.
2
2 Select “MAX. VOLUME” with the Programme
Down ()button, and set maximum volume
with the Volume
+
/
-
(or) button.
5
5 Press the MENU button to return to the normal
TV mode.
4
4 After complete the settings, select “HOTEL
MODE”, and set it “ON” with or .
3
3 Select “START PROGRAM” and set start up
position with or . To set AV position as a
start up position, press the TV/AV Selector.
4
4 Press the MENU button repeatedly to return to
the normal TV mode.
13
13
Private Position / Hotel Mode
Setting of the Skip Channels
If there are positions you do not use, by setting
skip channel function, it is possible to jump over
any position when you are selecting a channel
using the CH CH
button.
2
2 Select “SKIP” in the PRESET menu, and
press or to set SKIP “ON”.
To cancel the setting of skip, set SKIP “OFF”.
3
3 Select “MEMORY” and press or to
set “OK” to store the skip setting.
1
1 Select “POSITION.” from the PRESET menu.
And select programme position where you wish
to skip using the “0-9”, -/--, or button.
Private Position Setting
Private Position is used to restrict of programme
position that you do not want others to watch.
1
1 Select a programme position that you want to
set in private position.
2
2 Press and hold the Recall/Colour System
button for more than 2 seconds.
3
3 Press the MENU button.
To watch the programme of private position,
cancel the setting of private position .
1
1 Select private position.
2
2 Press and hold the Recall/Colour System
button for more than 2 seconds.
3
3 Press the MENU button.
To Next Page
Loading...
