Sanyo DP19640 - Continued Safety Instructions; Component Connection and Service Safety; Audio Volume and Cable Safety; Socket-Outlet Accessibility

-6-
r
WB SETTING
Pattern
White Pattern 100% (in AV mode).
Condition
Picture Mode: STANDARD
Color Temperature: NORMAL
Aging Time: More than 10 minutes
Adjustment
1. Enter the Service Mode.
2. Select "WB SETTING" by pressing ▲ or ▼ button, then press ENTER button to enter WB SETTING
menu. Usually it only need to set the value of Base Drive R, Base Drive G and Base Drive B, and it is
not necessary to set the value of others.
3. Exit the Service Mode.
After adjustment, confirm white balance again by normal picture.
Note:
Maybe BASE data for each TV set is different. And the items are for factory setting and Service Centre.
WB MENU
Base Drive G +0
Base Drive B +0
Color Temp Normal
Drive R +0
Drive G +0
Drive B +0
WB Source CVBS2
Drive R +0
Drive G +0
Drive B +0
Cutoff R +0
Cutoff G +0
Cutoff B +0
SERVICE ADJUSTMENTS
Base Drive R +0