Sanyo DP32242 - Input Signal that Can be Displayed

28
English
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI.
FORMAT
HORIZONTAL FREQUENCY
(KHZ)
VERTICAL FREQUENCY
(HZ)
COMPONENT HDMI
525 (480i) / 60i 15.734 59.940 * *
525 (480p) /60p 31.469 59.940 * *
750 (720p) /60p 45.000 60.000 * *
1,125 (1,080i) /60i 33.750 60.000 * *
1,125 (1,080p)/60p 67.500 60.000 * *
1,125(1,080p)/24p 27.000 24.000 *
640 × 480 @60 31.469 59.940 *
800 × 600 @60 37.879 60.317 *
1,024 × 768 @60 48.363 60.000 *
1,280 × 768 @60 47.776 59.870 *
1,280 × 1,024 @60
(only for 46”)
63.981 60.020 *
1,360 × 768 @60
47.712 60.015 *
NOTE:

Signals other than above may not be displayed properly or no support.

The above signals are reformatted for optimal viewing on your display.