Sanyo DP32649 - PC Connections and Setup; PC Setting; PC Picture Settings; PC Sound Settings

– 7 –
LCD PANEL REMOVAL
Lift up the LCD panel from front cabinet.
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated
Circuits) are Electrostatically Sensitive, and, therefore,
require special handling techniques as described
under “Servicing Electrostatically Sensitive Devices,”
on page two in this service literature.
SPEAKER REMOVAL
Remove 2 screws (E: 3x14) to take off each speaker.
E
E
RC LED BOARD REMOVAL
Rremove 1 screw (C: 3x14) to take the RC LED board off.
RC LED Board
C
C
KEY SW Board
KEY SW BOARD REMOVAL
Remove 1 screw (C: 3x14) to take the KEY SW board off.