24
CONNECTING AN AV RECEIVER TO THE DTV
DTV AUDIO OUT JACKS (DIGITAL & ANALOG)
DTV AUDIO OUT
COAXIAL
CABLE
AV RECEIVER
No Sound or Poor Sound
Check external equipment
connections.
Switch on external equipment.
HELP HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
OPERATING TIP:
Refer to the owner’s manual that came with your
external equipment for connection options.
AUDIO OUT
[For Stereo
Sound]
1
Connect a Coaxial Digital Audio cable from the
DTV Digital Audio Output jack to a Coaxial
Digital Audio In jack on an AV Receiver.
2
Connect an Audio cable from the DTV Audio
Out jacks to Audio In jacks on the AV
Receiver.
Note: Dolby® Digital 5.1 audio is available at the Digital
Audio Output only when received as part of a
Digital Antenna signal.
To Next Page
Loading...
